Vehicle Antenna

Military Vehicle Antenna (Vehicular antennas)最近遇到一個問題 當我整顆chip layout完成後 一般的DRC run過ok~ 但run antenna rule的時候 卻會發生一個錯誤 就是我chip中的input clock是以兩個pad differential的形式輸入(使用metal 6) 進chip後兩端並聯一個100歐姆的電阻 進主電路後是接到mos gate端 出現的錯誤應該就是說因為我的PAD面積大 需要有esd保護gate端 我記得只要經過VIA換金屬層走線就能解決 但我這樣做都沒有用~請問是什麼有可能的原因呢? 謝謝

Antennas for Military vehicles or Vehicular antennas for heavy-duty use, such as in the forest or in remote locations on armored vehicles, and low-profile antennas for civil vehicles. Communication and EW applications are examples of applications.
Wideband mobile VHF antennas with frequency ranges of 30 to 88 MHz or 30 to 108 MHz are designed primarily for use in heavy-duty mobile applications.
Typically, the antenna is made up of three major parts: the antenna base, the lower part, and the upper part. Some antennas have two sections, while others have three. The long-lasting antenna base with GPS (optional).
The stainless steel spring absorbs shocks and vibrations while also protecting the antenna from collisions.
Both radiating pieces are comprised of composite materials, which allow for exceptional strength and roughness even in the harshest environments. 來自: https://www.ptt.cc/bbs/Electronics/M.1245479925.A.D7F.html
Fei Teng Wireless Technology Co. Ltd